Enterasys 2000 Especificações descarregar pdf (Página 40)

Installing the Hardware

26 Enterasys Xpedition 2000 Getting Started Guide

Installing the Chassis

Enterasys recommends that only qualified personnel conduct installation of any XP

chassis.

Warning: Before performing any upgrade or installation procedures, ensure that the

XP-2000 is powered off.

This section contains procedures for the following types of installation:

• Table-top installation

• Rack mount installation

Table-Top Installation

You can install the XP-2000 on a tabletop.

1. Select a table that is stable (not wobbly) and is not in an area subject to frequent foot

traffic. Remember that you will be attaching numerous cables to the XP-2000.

2. Place the XP-2000 on the table, allowing at least 3” of space on each side for adequate

air flow to the cooling fans.

Rack Mount Installation

You can install the XP-2000 in a standard 19” equipment rack. The XP-2000 chassis

contains screw holes for front-mounting brackets.

Note: Never attempt to rack mount the XP-2000 unaided. Ask an assistant to help you

hold the chassis.

To install the XP-2000 chassis in an equipment rack, use the following procedure. You

need a phillips-head screwdriver to perform this procedure.

Figure 9 shows an example of how to install the XP-2000 in an equipment rack. The

procedure following the figure describes how to install the XP-2000 in an equipment rack.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 82 83

Sem comentários

Enterasys 2000 Especificações Página 40