Enterasys Enterasys Matrix DFE-Gold Series Especificações Página 103
- Página / 128
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
General Configuration Command Set
Setting Basic Device Properties
Matrix DFE-Gold Series Configuration Guide 2-77
2.2.3.28 set system contact
Use this command to identify a contact person for the system.
set system contact [string]
Syntax Description
Command Defaults
If string is not specified, the contact name will be cleared.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the system contact string:
string (Optional) Specifies a text string that contains the name
of the person to contact for system administration.
NOTE: A contact string containing a space in
the text must be enclosed in quotes as shown in
the example below.
Matrix(rw)->set system contact “Joe Smith”
- Enterasys Matrix™ 1
- DFE-Gold Series 1
- ENTERASYS NETWORKS, INC 4
- FIRMWARE LICENSE AGREEMENT 4
- Contents 7
- PORT CONFIGURATION 8
- SNMP CONFIGURATION 9
- SPANNING TREE CONFIGURATION 9
- 802.1Q VLAN CONFIGURATION 9
- IGMP CONFIGURATION 10
- IP CONFIGURATION 11
- SECURITY CONFIGURATION 11
- Contents 12
- Ta bl e s 17
- About This Guide 19
- STRUCTURE OF THIS GUIDE 20
- RELATED DOCUMENTS 21
- DOCUMENT CONVENTIONS 22
- Introduction 23
- Matrix Series CLI Overview 24
- 1.3 DEVICE MANAGEMENT METHODS 25
- 1.4 GETTING HELP 25
- Getting Help 26
- Factory Default Settings 28
- 2.1.3 CLI Command Modes 34
- 2.1.4 Using WebView 35
- • ro for Read-Only access 37
- • rw for Read-Write access 37
- Key Sequence Emacs Command 43
- Key Sequence vi Command 44
- 2.1.7.1 show line-editor 46
- 2.1.7.2 set line-editor 47
- Configuring the Line Editor 48
- 2.2.1.1 show system login 50
- 2.2.1.2 set system login 52
- 2.2.1.3 clear system login 53
- 2.2.1.4 set password 54
- 2.2.1.8 show system lockout 59
- 2.2.1.9 set system lockout 60
- 2.2.2.1 show mgmt-auth-notify 62
- 2.2.2.2 set mgmt-auth-notify 63
- 2.2.3.1 show ip address 69
- 2.2.3.2 set ip address 70
- 2.2.3.3 clear ip address 71
- 2.2.3.5 set ip gratuitous-arp 73
- 2.2.3.7 show system 75
- 2.2.3.8 show system hardware 77
- 2.2.3.12 show time 84
- 2.2.3.13 set time 85
- 2.2.3.14 show summertime 86
- 2.2.3.15 set summertime 87
- 2.2.3.16 set summertime date 88
- Syntax Description 90
- October 02:00 60 91
- 2.2.3.18 clear summertime 92
- 2.2.3.19 set prompt 93
- 2.2.3.20 set cli completion 94
- 2.2.3.21 loop 95
- 2.2.3.22 show banner motd 96
- 2.2.3.23 set banner motd 97
- 2.2.3.24 clear banner motd 98
- 2.2.3.25 show version 99
- • Bp: BootPROM version 100
- 2.2.3.26 set system name 101
- 2.2.3.27 set system location 102
- 2.2.3.28 set system contact 103
- 2.2.3.29 set width 104
- 2.2.3.30 set length 105
- 2.2.3.31 show logout 106
- 2.2.3.32 set logout 107
- 2.2.3.33 show physical alias 108
- 2.2.3.34 set physical alias 110
- 2.2.3.35 clear physical alias 112
- 2.2.3.37 set physical assetid 114
- 2.2.4.1 set license 117
- 2.2.4.2 show license 118
- 2.2.4.3 clear license 119
- Purpose 120
- 2.2.5.1 show inlinepower 122
- 2.2.5.2 set inlinepower mode 124
- 2.2.5.17 set port inlinepower 139
- 2.2.7.1 show boot system 145
- 2.2.7.2 set boot system 146
- 2.2.8.1 show telnet 148
- 2.2.8.2 set telnet 149
- 2.2.8.3 telnet 150
- 2.2.8.4 show router telnet 151
- 2.2.8.5 set router telnet 152
- 2.2.8.6 clear router telnet 153
- 2.2.9.1 dir 156
- Table 2-8 dir Output Details 157
- 2.2.9.2 show file 159
- 2.2.9.3 show config 161
- 2.2.9.4 configure 163
- 2.2.9.5 copy 164
- 2.2.9.6 delete 166
- 2.2.9.7 script 167
- 2.2.10.1 show neighbors 170
- 2.2.10.2 show cdp 171
- 2.2.10.3 set cdp state 173
- 2.2.10.4 set cdp auth 174
- 2.2.10.5 set cdp interval 175
- 2.2.10.6 set cdp hold-time 176
- 2.2.10.7 clear cdp 177
- 2.2.10.8 show ciscodp 178
- 2.2.10.10 set ciscodp status 182
- 2.2.10.11 set ciscodp timer 183
- 2.2.10.13 set ciscodp port 185
- 2.2.10.14 clear ciscodp 188
- 2.2.11.1 show mtu 191
- 2.2.11.2 set mtu 192
- 2.2.11.3 clear mtu 193
- 2.2.12.1 cls (clear screen) 195
- 2.2.12.2 exit 196
- 2.2.13 Resetting the Device 197
- 2.2.13.1 show reset 198
- 2.2.13.2 reset 199
- 2.2.13.3 reset at 200
- 2.2.13.4 reset in 201
- 2.2.13.5 clear config 202
- 2.2.14.1 show support 204
- 2.3.2.1 show router 209
- 2.3.2.2 set router 210
- 2.3.2.3 clear router 211
- 2.3.2.4 router 212
- • Set system 213
- • Save/copy 213
- and the 214
- Port Configuration 217
- Port Configuration Summary 218
- 3.3.1.1 show console 223
- 3.3.1.2 clear console 224
- 3.3.1.3 show console baud 225
- 3.3.1.4 set console baud 226
- 3.3.1.5 clear console baud 227
- 3.3.1.9 show console bits 231
- 3.3.1.10 set console bits 232
- 3.3.1.11 clear console bits 233
- 3.3.1.13 set console stopbits 235
- 3.3.1.15 show console parity 237
- 3.3.1.16 set console parity 238
- 3.3.1.17 clear console parity 239
- 3.3.2 Reviewing Port Status 240
- 3.3.2.1 show port 241
- 3.3.2.2 show port status 242
- 3.3.2.3 show port counters 244
- Reviewing Port Status 247
- 3.3.3.1 set port disable 251
- 3.3.3.2 set port enable 252
- 3.3.3.3 show port alias 253
- 3.3.3.4 set port alias 254
- 3.3.3.5 show forcelinkdown 255
- 3.3.3.6 set forcelinkdown 256
- 3.3.3.7 clear forcelinkdown 257
- 3.3.4.1 show port speed 259
- 3.3.4.2 set port speed 260
- 3.3.4.3 show port duplex 261
- 3.3.4.4 set port duplex 262
- 3.3.5.1 show port jumbo 264
- 3.3.5.2 set port jumbo 265
- 3.3.5.3 clear port jumbo 266
- 3.3.6.1 show port negotiation 268
- 3.3.6.2 set port negotiation 269
- 3.3.6.3 show port mdix 270
- 3.3.6.4 set port mdix 271
- 3.3.6.5 clear port mdix 272
- 3.3.6.6 show port advertise 273
- 3.3.6.7 set port advertise 275
- Command Mode 276
- Read-Write 276
- 3.3.6.8 clear port advertise 277
- 3.3.7 Setting Flow Control 279
- 3.3.7.1 show port flowcontrol 280
- 3.3.7.2 set port flowcontrol 282
- 3.3.8.1 show port trap 284
- 3.3.8.2 set port trap 285
- 3.3.8.3 show linkflap 286
- 3.3.8.5 set linkflap 291
- 3.3.8.6 set linkflap interval 292
- 3.3.8.7 set linkflap action 293
- 3.3.8.8 clear linkflap action 294
- 3.3.8.11 clear linkflap down 297
- 3.3.8.12 clear linkflap 298
- 3.3.9.1 show port broadcast 300
- 3.3.9.2 set port broadcast 302
- 3.3.9.3 clear port broadcast 303
- Overview: Port Mirroring 304
- 3.4.3.1 show port mirroring 305
- 3.4.3.2 set port mirroring 306
- 3.4.3.3 clear port mirroring 307
- 3.5.1 LACP Operation 309
- 3.5.2 LACP Terminology 310
- (Section 3.5.4.13) 311
- 3.5.4.1 show lacp 313
- 3.5.4.2 set lacp 315
- 3.5.4.3 clear lacp state 316
- 3.5.4.4 set lacp asyspri 317
- 3.5.4.5 set lacp aadminkey 318
- 3.5.4.6 clear lacp 319
- 3.5.4.7 set lacp static 320
- Configuring Link Aggregation 321
- 3.5.4.8 clear lacp static 322
- 3.5.4.10 set singleportlag 324
- 3.5.4.11 clear singleportlag 325
- 3.5.4.12 show port lacp 326
- for port fe.1.12: 327
- 3.5.4.13 set port lacp 329
- 3.5.4.14 clear port lacp 332
- SNMP Configuration 341
- 4.1.2 SNMPv3 342
- SNMP Configuration Summary 343
- 4.3.1.1 show snmp engineid 346
- 4.3.1.2 show snmp counters 347
- 4.3.2.1 show snmp user 354
- 4.3.2.2 set snmp user 356
- 4.3.2.3 clear snmp user 357
- 4.3.2.4 show snmp group 358
- 4.3.2.5 set snmp group 360
- 4.3.2.6 clear snmp group 361
- 4.3.2.7 show snmp community 362
- 4.3.2.8 set snmp community 363
- 4.3.2.9 clear snmp community 365
- 4.3.3.1 show snmp access 367
- 4.3.3.2 set snmp access 370
- 4.3.3.3 clear snmp access 372
- 4.3.4.1 show snmp view 374
- 4.3.4.2 show snmp context 376
- 4.3.4.3 set snmp view 377
- 4.3.4.4 clear snmp view 378
- 4.3.5.2 set snmp targetparams 383
- 4.3.6.1 show snmp targetaddr 387
- 4.3.6.2 set snmp targetaddr 389
- 4.3.6.3 clear snmp targetaddr 391
- 4.3.7.1 show snmp notify 393
- 4.3.7.2 set snmp notify 395
- 4.3.7.3 clear snmp notify 396
- About SNMP Notify Filters 397
- 4.3.7.5 set snmp notifyfilter 399
- and associate a target 402
- Spanning Tree Configuration 407
- 5.1.2 Spanning Tree Features 408
- 5.2.1.1 show spantree stats 413
- 5.2.1.2 show spantree version 416
- 5.2.1.3 set spantree version 417
- 5.2.1.5 show spantree stpmode 419
- 5.2.1.6 set spantree stpmode 420
- 5.2.1.12 set spantree msti 426
- 5.2.1.13 clear spantree msti 427
- 5.2.1.14 show spantree mstmap 428
- 5.2.1.15 set spantree mstmap 429
- 5.2.1.30 show spantree hello 445
- 5.2.1.31 set spantree hello 446
- 5.2.1.32 clear spantree hello 447
- 5.2.1.33 show spantree maxage 448
- 5.2.1.34 set spantree maxage 449
- Legacy Path Cost is disabled 457
- Tx hold count = 3 463
- 5.2.1.52 set spantree maxhops 467
- 5.2.1.75 show spantree debug 490
- 5.2.1.76 clear spantree debug 492
- 5.2.2.11 set spantree portpri 505
- Section 5.2.1.28 507
- Section 5.2.1.43 511
- 802.1Q VLAN Configuration 521
- • show vlan (Section 6.3.1.1) 523
- 6.3.1.1 show vlan 524
- 6.3.2.1 set vlan 527
- 6.3.2.2 set vlan name 528
- 6.3.2.3 clear vlan 529
- 6.3.2.4 clear vlan name 530
- 6.3.3.1 show port vlan 533
- 6.3.3.2 set port vlan 534
- 6.3.3.3 clear port vlan 536
- 6.3.3.4 show vlan interface 537
- 6.3.3.5 set vlan interface 538
- 6.3.3.6 clear vlan interface 539
- 6.3.3.9 show port discard 542
- 6.3.3.10 set port discard 543
- 6.3.3.11 clear port discard 544
- 6.3.4.1 show port egress 546
- 6.3.4.2 set vlan egress 547
- 6.3.4.3 clear vlan egress 549
- 1H152-51 554
- 6.3.6.1 show gvrp 556
- 6.3.6.2 show garp timer 558
- 6.3.6.3 set gvrp 560
- 6.3.6.4 clear gvrp 561
- 6.3.6.5 set garp timer 562
- 6.3.6.6 clear garp timer 564
- Configuring Policy Profiles 566
- 7.3.1.1 show policy profile 567
- 7.3.1.2 set policy profile 569
- 7.3.1.3 clear policy profile 571
- 7.3.1.4 show policy invalid 572
- 7.3.2.1 show policy rule 576
- 7.3.2.3 set policy classify 582
- 7.3.2.4 set policy rule 584
- 7.3.2.5 clear policy rule 588
- 7.3.2.7 set policy port 591
- 7.3.3.1 show cos state 600
- 7.3.3.2 set cos state 601
- 7.3.3.3 show cos port-type 602
- 7.3.3.4 show cos unit 605
- 7.3.3.5 show cos port-config 606
- 7.3.3.15 show cos reference 622
- 7.3.3.20 show cos settings 628
- 7.3.3.21 set cos settings 629
- 7.3.3.22 clear cos settings 630
- Configuration 635
- Configuring Port Priority 636
- 8.3.1.1 show port priority 637
- 8.3.1.2 set port priority 638
- 8.3.1.3 clear port priority 639
- • 100Base-T - 4 643
- • 1000Base-T - 4 643
- • 1000Base-X - 8 643
- 8.3.3.1 show port ratelimit 646
- 8.3.3.2 set port ratelimit 648
- 8.3.3.3 clear port ratelimit 650
- IGMP Configuration 651
- IGMP Configuration Summary 652
- 9.4.1.1 show igmp enable 654
- 9.4.1.2 set igmp enable 655
- 9.4.1.3 set igmp disable 656
- 9.4.2 Configuring IGMP 657
- 9.4.2.1 show igmp query 658
- 9.4.2.2 set igmp query-enable 659
- Configuring IGMP 660
- IGMP group table is full 661
- 9.4.2.6 show igmp config 663
- 9.4.2.7 set igmp config 665
- 9.4.2.8 set igmp delete 667
- 9.4.2.9 show igmp groups 668
- 9.4.2.10 show igmp static 669
- 9.4.2.11 set igmp add-static 670
- 9.4.2.13 show igmp protocols 672
- 9.4.2.14 set igmp protocols 673
- 9.4.2.15 clear igmp protocols 674
- 9.4.2.16 show igmp vlan 675
- 9.4.2.17 show igmp reporters 676
- 9.4.2.18 show igmp flow 677
- 9.4.2.19 show igmp counters 678
- Chapter 11 681
- 10.2.1.1 show logging all 683
- 10.2.1.2 show logging server 686
- 10.2.1.3 set logging server 687
- Configuring System Logging 688
- 10.2.1.4 clear logging server 689
- 10.2.1.5 show logging default 690
- 10.2.1.6 set logging default 691
- Table 10-3 693
- Mnemonic Application 697
- 10.2.1.11 show logging local 700
- 10.2.1.12 set logging local 701
- 10.2.1.13 clear logging local 702
- 10.2.1.14 set logging here 703
- 10.2.1.15 clear logging here 704
- 10.2.1.16 show logging buffer 705
- 10.2.2.1 history 707
- 10.2.2.2 show history 708
- 10.2.2.3 set history 709
- 10.2.2.4 show netstat 710
- 10.2.2.5 ping 712
- 10.2.2.6 show users 714
- 10.2.2.7 tell 715
- 10.2.2.8 disconnect 716
- 10.2.3 Configuring SMON 717
- 10.2.3.1 show smon priority 718
- 10.2.3.2 set smon priority 719
- 10.2.3.3 clear smon priority 720
- 10.2.3.4 show smon vlan 721
- 10.2.3.5 set smon vlan 722
- 10.2.3.6 clear smon vlan 723
- 10.2.4 Configuring RMON 724
- Configuring RMON 725
- 10.2.4.1 show rmon stats 728
- 10.2.4.2 set rmon stats 731
- 10.2.4.3 clear rmon stats 732
- 10.2.4.4 show rmon history 733
- 10.2.4.5 set rmon history 735
- 10.2.4.6 clear rmon history 736
- 10.2.4.7 show rmon alarm 737
- 10.2.4.10 clear rmon alarm 742
- 10.2.4.11 show rmon event 743
- SNMP trap, both, or none 744
- 10.2.4.14 clear rmon event 748
- 10.2.4.15 show rmon host 749
- Example 750
- 10.2.4.18 clear rmon host 753
- 10.2.4.19 show rmon topN 754
- 10.2.4.22 clear rmon topN 759
- 10.2.4.23 show rmon matrix 760
- 10.2.4.26 clear rmon matrix 764
- 10.2.4.27 show rmon channel 765
- 10.2.4.28 set rmon channel 766
- “capture all” 767
- 10.2.4.29 clear rmon channel 768
- 10.2.4.30 show rmon filter 769
- 10.2.4.31 set rmon filter 770
- 10.2.4.32 clear rmon filter 772
- 10.2.4.33 show rmon capture 773
- 10.2.4.34 set rmon capture 775
- 10.2.4.35 clear rmon capture 777
- 10.2.5.1 show arp 779
- 10.2.5.2 set arp 780
- 10.2.5.3 clear arp 781
- 10.2.5.4 show rad 782
- 10.2.5.5 set rad 783
- 10.2.5.6 show ip route 784
- 10.2.5.7 traceroute 786
- 10.2.5.8 set ip route 789
- 10.2.5.9 clear ip route 790
- 10.2.5.10 show port mac 791
- 10.2.5.11 show mac 792
- 10.2.5.12 set mac 794
- 10.2.5.13 clear mac 795
- 10.2.5.14 show newaddrtraps 797
- 10.2.5.15 set newaddrtraps 798
- 10.2.5.16 show movedaddrtrap 799
- 10.2.5.17 set movedaddrtrap 800
- 10.2.6.1 show sntp 802
- 10.2.6.2 set sntp client 804
- 10.2.6.3 clear sntp client 805
- 10.2.6.4 set sntp server 806
- 10.2.6.5 clear sntp server 807
- 10.2.6.10 set sntp poll-retry 812
- 10.2.6.14 show timezone 816
- 10.2.6.15 set timezone 817
- 10.2.6.16 clear timezone 818
- 10.2.7.1 show nodealias 820
- 10.2.7.2 show nodealias mac 822
- Configuring Node Aliases 824
- 10.2.7.5 set nodealias 828
- 10.2.7.7 clear nodealias 830
- 10.2.8 Configuring NetFlow 832
- 10.2.8.1 show netflow 833
- 10.2.8.2 set netflow 835
- 10.2.8.3 clear netflow 836
- IP Configuration 837
- IP Configuration Command Set 838
- 11.2.1.1 show interface 840
- 11.2.1.2 interface 842
- 11.2.1.4 show ip interface 844
- 11.2.1.5 ip address 846
- 11.2.1.6 no shutdown 847
- 11.2.2.1 show running-config 849
- 11.2.2.2 write 850
- 11.2.2.3 no ip routing 852
- 11.2.4.1 show ip arp 856
- 11.2.4.2 arp 858
- 11.2.4.3 ip gratuitous-arp 859
- 11.2.4.5 ip proxy-arp 861
- 11.2.4.6 ip mac-address 862
- 11.2.4.7 arp timeout 863
- 11.2.4.8 clear arp-cache 864
- 11.2.5.2 ip forward-protocol 867
- About DHCP/BOOTP Relay 868
- 11.2.5.3 ip helper-address 869
- 11.2.6.1 show ip protocols 872
- 11.2.6.2 show ip traffic 873
- 11.2.6.3 clear ip stats 875
- 11.2.6.4 show ip route 876
- 11.2.6.5 ip route 878
- 11.2.6.6 ip icmp 880
- 11.2.6.7 ping 881
- 11.2.6.8 traceroute 882
- 11.2.7 Configuring PIM 883
- 11.2.7.1 ip pim sparse mode 884
- 11.2.7.2 ip pim bsr-candidate 885
- Configuring PIM 886
- 11.2.7.3 ip pim dr-priority 887
- 11.2.7.4 ip pim rp-address 888
- 11.2.7.5 ip pim rp-candidate 889
- 11.2.7.6 show ip pim bsr 890
- 11.2.7.8 show ip pim neighbor 894
- 11.2.7.9 show ip pim rp 896
- 11.2.7.10 show ip pim rp-hash 898
- 11.2.7.11 show ip mroute 899
- 11.2.7.12 show ip mforward 901
- About LSNAT 902
- Session Persistence 903
- Task Use these commands 905
- NOTE: These commands must be 907
- 11.2.8.2 ip slb ftpctrlport 909
- 11.2.8.3 ip slb serverfarm 910
- 11.2.8.4 real 911
- 11.2.8.5 predictor 912
- 11.2.8.6 sticky 913
- 11.2.8.7 show ip slb reals 914
- 11.2.8.10 maxconns 920
- 11.2.8.11 weight 921
- 11.2.8.13 ip slb vserver 925
- 11.2.8.14 serverfarm 926
- 11.2.8.15 virtual 927
- 11.2.8.17 client 930
- 11.2.8.18 persistence level 931
- 11.2.8.19 allow accessservers 933
- 11.2.8.21 show ip slb conns 936
- 11.2.8.22 show ip slb stats 938
- 11.2.8.23 show ip slb sticky 939
- 11.2.8.24 clear ip slb 940
- 11.2.8.25 show router limits 941
- 11.2.8.26 set router limits 942
- 11.2.8.27 clear router limits 944
- DHCP Overview 945
- Configuring DHCP 945
- DHCP Task List 946
- DHCP Command Modes 946
- 11.2.9.1 ip dhcp server 949
- 11.2.9.2 ip local pool 950
- 11.2.9.3 exclude 951
- 11.2.9.4 ip dhcp ping packets 952
- 11.2.9.5 ip dhcp ping timeout 953
- 11.2.9.6 ip dhcp pool 954
- 11.2.9.7 domain-name 955
- 11.2.9.8 dns-server 956
- 11.2.9.9 netbios-name-server 957
- 11.2.9.10 netbios-node-type 958
- 11.2.9.11 default-router 959
- 11.2.9.12 bootfile 960
- 11.2.9.13 next-server 961
- 11.2.9.14 option 962
- 11.2.9.15 lease 964
- 11.2.9.16 host 965
- 11.2.9.17 client-class 966
- 11.2.9.18 client-identifier 967
- 11.2.9.19 client-name 968
- 11.2.9.20 hardware-address 969
- 12.2.2 Configuring RIP 976
- 12.2.2.1 router rip 978
- 12.2.2.2 network 979
- 12.2.2.3 neighbor 980
- 12.2.2.4 distance 981
- 12.2.2.5 ip rip offset 983
- 12.2.2.6 timers 984
- 12.2.2.7 ip rip send version 985
- About RIP Authentication 987
- 12.2.2.9 key chain 988
- 12.2.2.10 key 989
- 12.2.2.11 key-string 990
- 12.2.2.12 accept-lifetime 991
- 12.2.2.13 send-lifetime 993
- 12.2.2.16 no auto-summary 997
- 12.2.2.19 passive-interface 1000
- 12.2.2.20 receive-interface 1001
- 12.2.2.21 distribute-list 1002
- 12.2.2.22 redistribute 1003
- Configuring RIP 1004
- 12.2.3 Configuring OSPF 1005
- Configuring OSPF 1006
- 12.2.3.1 router ospf 1008
- 12.2.3.2 network 1009
- 12.2.3.3 router id 1010
- 12.2.3.4 ip ospf cost 1011
- 12.2.3.5 ip ospf priority 1012
- 12.2.3.6 timers spf 1013
- 12.2.3.13 distance ospf 1020
- Command Defaults 1021
- 12.2.3.14 area range 1022
- 12.2.3.15 area authentication 1023
- 12.2.3.16 area stub 1024
- 12.2.3.17 area default cost 1025
- 12.2.3.18 area nssa 1026
- 12.2.3.19 area virtual-link 1027
- 12.2.3.20 passive-interface 1029
- 12.2.3.21 redistribute 1030
- 12.2.3.22 database-overflow 1032
- 12.2.3.23 show ip ospf 1034
- Output What It Displays 1038
- Output What It Displays 1041
- 12.2.3.30 debug ip ospf 1048
- 12.2.3.31 rfc1583compatible 1049
- 12.2.4 Configuring DVMRP 1050
- Commands 1050
- 12.2.4.1 ip dvmrp 1051
- 12.2.4.2 ip dvmrp metric 1052
- 12.2.4.3 show ip dvmrp route 1053
- 12.2.5 Configuring IRDP 1055
- 12.2.5.1 ip irdp 1056
- Configuring IRDP 1057
- 12.2.5.4 ip irdp holdtime 1059
- 12.2.5.5 ip irdp preference 1060
- 12.2.5.6 ip irdp address 1061
- 12.2.5.7 no ip irdp multicast 1062
- 12.2.5.8 show ip irdp 1063
- 12.2.6 Configuring VRRP 1064
- 12.2.6.1 router vrrp 1065
- 12.2.6.2 create 1066
- 12.2.6.3 address 1067
- 12.2.6.4 priority 1069
- 12.2.6.5 master-icmp-reply 1070
- 12.2.6.6 advertise-interval 1071
- Configuring VRRP 1072
- 12.2.6.7 critical-ip 1073
- VLAN 1, VRID 1: 1074
- 12.2.6.8 preempt 1075
- 12.2.6.9 preempt-delay 1076
- 12.2.6.10 enable 1078
- 12.2.6.13 show ip vrrp 1081
- Security Configuration 1083
- Overview of Security Methods 1084
- Policy Profile Assignment 1085
- Filter-ID Attribute Formats 1085
- • TACACS+ 1089
- • RADIUS 1089
- 13.3.2 Configuring RADIUS 1090
- 13.3.2.1 show radius 1092
- 13.3.2.2 set radius 1094
- 13.3.2.3 clear radius 1096
- Configuring RADIUS 1097
- • IP address 1099
- 13.3.3 Configuring RFC 3580 1102
- About RFC 3580 1102
- Configuring RFC 3580 1104
- 13.3.4 Configuring TACACS+ 1106
- 13.3.4.1 show tacacs 1107
- 13.3.4.2 set tacacs 1110
- 13.3.4.3 clear tacacs 1112
- 13.3.5.1 show dot1x 1115
- Examples 1116
- 13.3.5.3 set dot1x 1120
- About PWA 1125
- • forward ARP requests 1126
- 13.3.6.1 show pwa 1128
- 13.3.6.2 set pwa 1131
- 13.3.6.3 set pwa hostname 1132
- 13.3.6.4 clear pwa hostname 1133
- 13.3.6.5 show pwa banner 1134
- 13.3.6.6 set pwa banner 1135
- 13.3.6.7 clear pwa banner 1136
- 13.3.6.8 set pwa displaylogo 1137
- 13.3.6.9 set pwa redirecttime 1138
- 13.3.6.10 set pwa ipaddress 1139
- 13.3.6.11 set pwa protocol 1140
- 13.3.6.13 set pwa guestname 1142
- 13.3.6.14 clear pwa guestname 1143
- 13.3.6.16 set pwa gueststatus 1145
- 13.3.6.17 set pwa initialize 1146
- 13.3.6.18 set pwa quietperiod 1147
- 13.3.6.19 set pwa maxrequests 1148
- 13.3.6.20 set pwa portcontrol 1149
- 13.3.6.21 show pwa session 1151
- About CEP Phone Detection 1175
- 13.3.8.1 show cep connections 1177
- 13.3.8.2 show cep detection 1178
- 13.3.8.3 show cep policy 1179
- 13.3.8.4 show cep port 1180
- 13.3.8.5 set cep 1181
- 13.3.8.6 set cep port 1182
- 13.3.8.7 set cep policy 1183
- • Both UDP and TCP 1187
- 13.3.8.13 set cep initialize 1189
- 13.3.8.14 clear cep 1190
- parameters 1191
- 13.3.9.1 show maclock 1193
- 13.3.9.3 set maclock enable 1197
- 13.3.9.4 set maclock disable 1198
- 13.3.9.5 set maclock 1199
- Configuring MAC Locking 1200
- 13.3.9.7 set maclock move 1201
- 13.3.9.9 set maclock static 1203
- 13.3.9.11 set maclock trap 1205
- 13.3.9.12 clear maclock 1206
- About Multiple Authentication 1207
- 13.3.10.1 set multiauth mode 1209
- precedence: 1212
- 13.3.10.5 show multiauth port 1213
- 13.3.10.6 set multiauth port 1214
- 13.3.11.1 show ssh state 1226
- 13.3.11.2 set ssh 1227
- 13.3.11.3 set ssh hostkey 1228
- 13.3.11.4 show router ssh 1229
- 13.3.11.5 set router ssh 1230
- 13.3.11.6 clear router ssh 1231
- 13.3.12.1 show access-lists 1233
- Configuring Access Lists 1234
- ip access-group command 1234
- * Advanced License Required * 1237
- 13.3.12.4 ip access-group 1242
- About Policy-Based Routing 1243
- 13.3.13.1 show route-map 1245
- 13.3.13.2 route-map 1246
- 13.3.13.3 match ip address 1248
- 13.3.13.4 set next hop 1249
- 13.3.13.5 show ip policy 1250
- 13.3.13.6 ip policy route-map 1252
- 13.3.13.7 ip policy priority 1253
- 13.3.13.9 ip policy pinger 1255
- 13.3.14.1 show hostdos 1257
- 13.3.14.2 hostdos 1258
- About FST 1261
- 13.3.15.1 show flowlimit 1263
- 13.3.15.2 set flowlimit 1264
- 13.3.15.3 set flowlimit limit 1265
- • user port 1267
- • server port 1267
- • aggregation port 1267
- • inter-switch link 1267
- • unspecified port 1267
- • interswitch link 1271
- 13.3.15.8 set flowlimit port 1273
- Numerics 1281
Manuais e produtos relacionados com Comutadores de rede Enterasys Enterasys Matrix DFE-Gold Series
(24 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.300 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais